© 2020 RGL Enterprises, LLC.

MPM Corporation Screen Printers

TF-100 Screen Printer

Standard Features:

  • Precision print head to - carriage alignment using unique one-print Mylar adjustment system with X, Y and theta micrometer adjustments.
  • Consistent print uniformity
  • All adjustments have independent locks and stay in setup
  • User-selectable print cycles: single print mode with flood print/print flood; alternate; and double print modes
  • Contact /Off-contact printing capability
  • Hydraulic squeegee drive (air-over-oil) with adjustable speed and stroke
  • Squeegee pressure adjusted by calibrated coil springs
  • Adjustable squeegee down stop and angle of attach
  • Choice of fixed or floating squeegee assembly
  • No tools required for set-up

TF-100 Screen Printer

System Specifications

Class Description Detail
Print Area: 6" x 6"  
Frame Size: Inside dimensions: 5" x 5" up to 12" x 12"
Substrate Carriage: Registration Repeatability: 0.0005"
Substrate Size: 6" x 6"
X-Y Adjustment: 0.500" range (micrometer)
Rotary Adjustment: 10" (micrometer)
Squeegee Head: Print Stroke Adjustment: 1" to 9"
Speed: 0 to 15" per second
Screen Height Adjustment: 1" range (dial indicator)
Pressure: 2-30 LB by calibrated coil springs
Angle of Attack Adjustment: +/- 5"
Squeegee Holder: 7.5" maximum (specify) with .0375" square blade
Service: Power: 115Vac, 60 Hz (220 Vac, 50 Hz), 1 A
Air: 80 - 125 psig @ 6cfm
Vacuum: 23 Hg @ 4cfm
Dimensions: Printer:  42" L x 16" W x 17" H
Formica Covered Table:  48" L x 37" W
Steel Stand:  28" H
Shipping Weight: 300 LB