CM Furnace
Model No. 4912-144-4Z
Vin: 1998
Power Rating: 250 KVA
Supply Line Voltage: 480 Volts
Supply Line Current: 400 Amps
Supply Line Phase: 3 Phase
Supply Line Frequency: 60 HZ
Max Temp: 2100° F - Preheat / 3100° F Furnace
Process Atmosphere: Hydrogen and/or Hydrogen & Nitrogen
Protective Atmosphere: Nitrogen
|
ITEM |
QTY |
UNIT | VALUE |
TOTAL |
||
| 01 | S.S. Stacking Hardware | 2000 | ea | $0.09 | $180.00 | |
| 02 | Ceramic Stacking Hardware | 2000 | ea | 0.32 | 640.00 | |
| 03 | 350# Alundum 38 Sintering Sand | 350 | lbs | 0.85 | 297.50 | |
| 04 | 1 Complete Set Hearth Plates For High Heat | 1 | ea | 1,225.00 | 1,225.00 | |
| 05 | 16 Replacement Saggers (NEW) 12 X 12 | 16 | ea | 63.00 | 1,008.00 | |
| 06 | 84 Used Saggers (on furnace) 12 X 12 | 84 | ea | 36.20 | 3,040.80 | |
| 07 | 100 New Style Saggers (Used in NEW Condition) 12 X 12 | 100 | ea | 25.00 | 2,500.00 | |
| 08 | 84 Flat Pusher Plates 12 X 12 | 84 | ea | 28.00 | 2,352.00 | |
| 09 | 20 Old Flat Pusher Plates 12 X 12 | 20 | ea | 24.00 | 480.00 | |
| 10 | 50 Hycor Cover Plates 11 X 11 | 50 | ea | 12.00 | 600.00 | |
| 11 | 80 12 X 12 86% Alumina Sintering Plates | 80 | ea | 8.00 | 640.00 | |
| 12 | 1 Replacement Pre-Heat Element (NEW) | 1 | ea | 1,327.50 | 1,327.50 | |
| 13 | Miscellaneous Handling Tools | 1 | Set | 100.00 | 100.00 | |
| 14 | Humidifier | 1 | ea | 250.00 | 250.00 | |
| 15 | Extractor Motor w/Gear Reduction | 1 | ea | 287.00 | 287.00 | |
| 16 | 500# Furnace Load Simulation | 500 | lbs. | 1.00 | 500.00 | |
| 17 | Temperature Controller | 1 | ea. | 480.00 | 480.00 | |
| 18 | 52 (NEW) 11 X 11 Saggers (boat style) | 52 | ea. | 29.00 | 1,508.00 | |
| 19 | 100 12 X12 Saggers (Boat Style) | 100 | ea. | 36.03 | 3,603.00 | |
| 20 | 100 Flat Pusher Plates 12 X 12 *NEW* | 100 | ea. | 35.00 | 3,500.00 | |
| 21 | Glycol Coolant Recovery | 1 | ea. | 350.00 | 350.00 | |
| 22 | Inlet Air Condenser | 1 | ea. | 150.00 | 150.00 | |
| 23 | 2 - Mark II *Smarteye Sensors* | 2 | ea. | 224.00 | 448.00 | |
| 24 | Extractor Coupling | 1 | ea. | 24.10 | 24.10 | |
| 25 | Element Stubs (1 New / 1 Used) | 2 | ea. | 196.00 | 392.00 | |
| 26 | Microswitch for Extractor | 1 | ea | 57.11 | 57.11 | |
| 27 | Flow Switch | 1 | ea | 52.09 | 52.09 | |
| 28 | BlowOut Disks | 1 | Kit | 3.20 | 3.20 | |
| 29 | Rutland Coupling | 1 | ea. | 14.50 | 14.50 | |
| 30 | 10 Element Hooks | 10 | ea. | 12.50 | 125.00 | |
| 31 | 4 Cross Pusher Bearings | 4 | ea. | 18.60 | 74.40 | |
| 32 | Shoulder Bolts | 1 | Box | 4.85 | 4.85 | |
| 33 | Miscellaneous Chain Links for Belt | 1 | Box | 2.50 | 2.50 | |
| 34 | Rear Extractor Chain Links | 1 | ea. | 11.20 | 11.20 | |
| 35 | 3 Fiber Optic Light Guides | 3 | ea. | 112.50 | 337.50 | |
| 36 | 2 Magnetic Reed Switch for Vertical Cyl. Door Lift | 2 | ea. | 186.00 | 372.00 | |
| 37 | Pusher (Lead) Screw | 1 | ea. | 267.84 | 267.84 | |
| 38 | 3HL44 T/C | |||||
| 39 | Double Roller Chain | |||||
| 40 | Wire Thermocouple | |||||
| 41 | Z320-TC | |||||
| 42 | T/C 12" MGO Type *N* | |||||
| 43 | Flange Block | |||||
| 44 | ASCO Valve 8300G076U | |||||
| 45 | Grease Block 509-150-000 |
